RFQ - Production

Please take a few minutes to fill out our Request for Quotation form. This will help OAR Moldworks to better serve you and provide a fast & accurate quote. We ask our customers to be as thorough and specific as possible in describing their needs. Additional space for notes & comments is provided at the bottom of the page. Fields marked with * are required.

If you have any questions about this form or wish to speak to a representative, please e-mail us arosenholm@oarmoldworks.com or call us at 401-781-2352. Thank You!
Contact Name:*
Company:*
Address 1:*
Address 2:
City:*
State/Province:*
ZIP/Post Code:*
Country:*
Telephone#:*
FAX#:*
e-mail:*

Contact Preference:
e-mail
Telephone
FAX

 
Part Name:
B/P #
Rev. #
# Cav
1
2
3

Mold Type
Injection
Compression
Transfer
2-plate [standard]
3-plate
Stripper plate
2-Shot
Co-injection
Gas-assist
Vertical Injection
Reel-to-Reel
Hot Sprue
Valve Gated Hot Sprue
Hot Runner
Valve Gated Hot Runner
Insulated Runner
P/L injection
Other

Special Features
Guided Ejection
Spring Loaded Ejection
Accelerated Ejection
Postitive Ejection Return
Double Ejection
Hydraulic Ejection
Stationary Side Ejection
Molded-in Inserts
Spring Loaded Floating Plate
Tapered Button Interlocks
SquareSide P/L Interlock
Date Inserts
Date Grid
Special Mold Base Engraving
Special Component Engraving
Cycle Counter
Water Baffles
Plated cavities/cores
Other

Mold Class
SPI 101
SPI 102
SPI 103
SPI 104
Prototype
Unit Die
Other:
 

Type of Gate
Edge Gate
Center Sprue
Sub-gate
Pin Point
Other:
 
   

Mold Base Steel
#1
#2
#3
420-SS
Other:
 
Nickel Plating

Press
Clamp Tons
Make / Model

Material
Cavities
 
Cores
Tool Steel
Other:
 
 

Finish
Cavities
 
Cores
SPE/SPI
Machine Finish
Chrome Plate
Texture
OAR EDM#
Other:
 
 

Cooling
Cavities
 
Cores
Inserts
Retainer Plates
Bubblers
Other:
 
 

Ejection
Cavities
 
Cores
Ejector Pins
Ejector Blades
Stripper Sleeves
Stripper Plate
Pneumatic
Lifters
Unscrewing
Manual Inserts
Other:
 
 

Side Actions
Cavities
 
Cores
Angle Pin
Hydraulic Cylinder
Air Cylinder
Positive Lock
CAM
Ejection Activated
Other:
 
 

Hardness
Cavities
 
Cores
Hardened
Pre-hard
Other:
 
 

Performance Guarantee **
1,000,000 cycles
500,000 cycles
250,000 cycles
Other:
 
No Guarantee

Mold Try-out by:
Moldmaker
  
Customer
 

Material Supplied by:
Moldmaker
  
Customer
 

Design by:
Moldmaker
  
Customer
 

Engraving
Cavity ID
Alpha-Numeric
Dot
Raised
Sunken
KO pin
Direct To Steel

Part Number
Raised
Sunken

Notes / Comments:

** Normal wear items not included in performance guarantee. Normal wear items include, but are not limited to: KO pins, blade and sleeve ejectors,leader pins and bushings, PL interlocks, sprue bushings and hot runner systems, hydraulic/pneumatic devices, sub-gates and edge gates, ejectionsystem tie-ins, wear plates, alignment pins and loading devices. Purchased components limited to original manufacturer’s guarantee.

 

OAR Moldworks